Semi-finished
|
|
|
|
Slabs
Steel slabs are hot-rolled from an ingot or strand cast. They are wide and rectangular in shape.
|
|
|
|
Billets
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross section less than 36 square inches.
|
|
|
|
Blooms
Blooms are hot-rolled or forged from an ingot or strand cast. They usually have a square cross section exceeding 36 square inches.
|
|
|
Flat
|
|
|
|
Hot roll in Coils
Grade: Q235B,SS400B,A36,SAE1008B;SAE1006B;SPHC,etc.
Specification：1.2-20mm*800-2000mm*coil
Manufactory：Tang Steel,Sha Steel,Xinyu Steel,Benxi Steel,Jianlong Steel etc.
|
|
|
|
Hot rolled steel plate
Grade：SS400B/A36B,Q345B/A572GR50/S355JR,NM400,A516GR70 etc.
Specification:5-380mm*1500-4050mm*6000-16000mm(Can be customize according to custom’s requirements)
Manufactory:Yingkou Steel,Tianjin Steel,Baotou Steel,Puyang Steel,Tangzhong Steel,Nan Steel,Xinyu Steel etc.
|
|
|
|
Cold rolled steel coils
Grade:SPCC,DC01,DC02,DC03,DC04,SAE1006,SAE1008,Q195
Specification:0.13-3.0mm*700-1850mm
Manufactory:Handan Steel,Tang Steel,Lianyuan Steel,Baotou Steel,Laiwu Steel,Huaxi Steel,Shou Steel,etc.
|
|
|
|
Prime hot dipped galvanized steel sheet in coils
Grade: DX51D,SGCC,ASTM 1653,S220GD-S350GD,
Specification:0.13-3.0mm*600-1850mm,Coating：Z40-Z275；
Manufactory:Handan Steel,Tang Steel,Wisco Steel,Zhongguan Steel,Lianyuan Steel,Baotou Steel,Laiwu Steel,Panhua Steel,Wuxi Zhongcai,etc.
|
|
|
|
Pre-painted galvanized steel coils
Grade:SGCC,DX51D,ASTM A653
Specification:0.13-1.2mm*600-1290mm
Manufactory:Zhongguan Steel,Tianjin xinyu,Baoshun Steel,Shandong Kerui,Ningbo Zhongmeng,Panhua Steel,Wuxi Zhongcai,etc.
|
|
|
|
Aluminum-zinc coated in coils
Grade:ASTM A792 G37,ASTM A572
Specification:0.15-2.5mm*750-1500mm,AZ30-AZ150
Manufactory:Tianjin Xinyu,Huaxi Steel,Zhongguan Steel,Panhua Steel, Lianyuan Steel,etc.
|
|
|
|
Prime cold rolled steel full hard in coils
Grade: DC01、SPCC-1B、SPCC-SB、SPCC-SD、SPCD、SPCE
Specification: 0.14-2.5mm*700-1500mm*C
Manufactory: Handan Steel,Tang Steel,Lianyuan Steel,Baotou Steel,Laiwu Steel,Wuxi Zhongmeng,etc.
|
|
|
|
Prime Hot rolled steel plates for shipbuilding:
Grade:ABS,DNV,LR,CCS,GL,NK,KR,RINA（From Grade A to Grade D）
Specification:5-80mm*1500-4000mm*6000-16000mm(Can be customize according to custom’s requirements)
Manufactory:Yingkou Steel、Nan Steel、Xinyu Steel,etc.
|
|
|
Long
|
|
|
|
Bulb flat steel
Grade:ABS,DNV,LR,CCS,GL,NK,KR,RINA,BV （From grade A to grade DH36）
Specification:80-430mm
Manufactory:Longteng special steel、Tangshan Xinxin special steel
|
|
|
|
Hot Rolled Round Bar
Grade:S20C,S45C,SCM440,15B36CR,SCM415,SCM420
Specification:0mm-1000mm*Length
Manufactory:Huai Steel,Laiwu Steel,Daye Steel,Dongbei special steel,Xi Steel,etc.
|
|
|
|
Debar
Grade:HRB335,HRB400,HRB500, BS4449 GR460B,500B;ASTM A615 GR60;
Specification:DIA 6-40mm（6;8;10;12;13;14;16;18;20;22;25;28;32;40）
Manufactory:Xicheng,Tianjin Steel,Xuanhua Steel,Xinyu Steel,Beitai,Sha Steel,Yong Steel etc.
|
|
|
|
Wire Rod
Grade:SAE1006B,SAE1008B,SAE1010B,SAE1045B,72B;77BASTM A615 GR60;82B,ect.
Specification:DIA5.5-34mm(5.5;6.5;7;8;9;10;11;12;13;14;etc.)
Manufactory:Xuanhua Steel,xinyu steel,Tianjin steel,Sha steel,Yong steel,Beitai,jiujiang,Qingdao,Wisco, etc.
|
|
|
Tubes & Pipes
|
|
|
|
Seamless Tubes
Seamless tubes are made by rolling a preheated billet between offset rolls to create a tube shell. The tube shell is then elongated in a multi-stand rolling mill (with a mandrel) to achieve the desired wall thickness and a limited range of diameters. Tube diameter can also be achieved with a sizing collar, but for significant diameter changes the tube is reheated and passed through a stretch-reducing mill – a multi-stand mill that reduces outside diameter but not wall thickness. The seamless range also includes Oil Country Tubular Goods (OCTG.)
|
|
|
|
Welded Tubes
Welded tubes are made from hot rolled or cold reduced strip, sheet or plate. Welded tube includes hollow sections, black and galvanised gas/water pipe, scaffolding tube and large diameter pipe. Small and medium diameters are produced in continuous, multiple-roll mills that progressively bend incoming, unheated strip into a circular cross-section prior to welding along the longitudinal seam. Tube may subsequently be cold-drawn through dies to achieve precise dimensions and finish. Large diameters (400-1,600mm) are made from discrete plate which is welded in an “O” shape before being mechanically or hydraulically expanded. Spiral welded tube/pipe is available in diameters up to 2,500mm.
|
|
|
|
ROUND BLOOM
GRADE：S355NL，42CrMo4， A350LF2，A105, S45C
SIZE：300-1200mm
|
|
|
Stainless
|
|
|
Stainless Steel
Stainless steel is the generic name for a number of different steels used primarily for their resistance to corrosion. The one key element they all share is a minimum percentage of chromium: 10.5%. Although other elements are added to improve corrosion resistance, chromium is always present. The principal grades are austenitic (typically 16-26%Cr, 6-22Ni); ferritic (10.5-28%Cr with no/low Ni); martensitic (higher carbon content than ferritic and typically 12-19%Cr with low/no Ni); and duplex, a dual-phase austenitic/ferritic steel (Cr>21%, Ni <8%).
|
|
|
|
ZAM
Grade: S220GD-S550GD, SGMCC, DC51D
Size：0.2-6mm*750-160mm
Coating: 30-600g
Mill: Shougang, HBIS, NTG，Zhaojian, Xinyu
Element: Zn-6%Al-3%Mg
|
|
NGO
Grade: M800, M600, M470, M440, M350, M270, M250 ETC
SIZE: 0.65-0.20 MM*980-1280mm
COATING： SEMI-ORGANIC
Mill: XINYU, ANGANG, SHOUGANG, SHAGANG, ETC
APPLICATION: motor, compressor, etc
|
|
|
|
GO
GRADE: 120, 110, 105, 100, 95, 90, 85,80, 75, 70
SIZE: 0.15-0.30mm*900-1200mm
COATING: INORGANIC
MILL: SHOUGANG, ANGANG, CHONGQINGWANGBIAN, PTTX ETC
APPLICATION: Larger transformer, distribution transformer, larger motor,
voltage regulator, reactor and magnetic amplifier etc
|
|
|
